JLG X17J Plus Operator Manual - Manual (Page 53)

POSITION 8:
Position 8 displays the battery charge status or the icon indicating the battery is being
recharged in the Lithium version.
Position 8 is used to show the selection of the emergency descent operation from the basket
with solenoid valves on the cylinders.
In addition to the main screen described above, there are other functional displays that
will be described successively.
4.2.1 JOYSTICKS
Using the joysticks the operator selects the movement to be performed, the direction and the
speed. The direction of the joystick determines the direction of the movement. The degree of
movement of the joystick determines the speed. The more the joystick is moved away from
the central neutral position, the faster the movements obtained.
Starting from the left in the figure shown below, the joysticks are numbered from 1 to 8. The
following table shows the movement controlled and its direction depending on the joystick
shifting direction.
The angular position control does not work correctly
The machine has a CANBUS line connection fault.
A faulty or incorrect electronic board (card) has been installed, or alter‑
natively an incorrect software version has been loaded.
X17JPR0020413
BOOM LIFT MODELS X17JPLUS
JLG
49