Eppendorf D30 BioPhotometer User Manual
Page 25
25
Operation
Eppendorf BioPhotometer
®
D30
English (EN)
5.3.2.4 Measuring samples
5.3.2.5 Finalizing the method
5.3.2.6 Optional: process results
The sample key is used for measuring your
samples consecutively.
Blank results will remain saved for the duration of
one series of measurement. However, a new blank
measurement always is possible. (The adjacent
figure shows a measuring procedure with
evaluation via the standard curve and, in addition
to the sample result, the graph of the standard
evaluation.)
1. Press [Finish], to complete the measuring series
and return to the method selection.
2. After all measurements have been completed,
switch off the device and close the cuvette shaft
cover to protect the cuvette shaft from
contamination.
For the methods of the Nucleic acids method
group, you can postprocess the results in the
process results method step.
Use the and cursor keys for selecting
systematically any results of the series of
measurement for postprocessing.
More Calc. softkey: Convert the concentration
results to molar concentrations or to nucleic acid
quantities (unit mass or mol).