5 connecting pc or usb stick for data export, Connecting pc or usb stick for data export – Eppendorf D30 BioPhotometer User Manual

Page 17

Installation

Eppendorf BioPhotometer

D30

English (EN)

4.5

Connecting PC or USB stick for data export

You can connect a

FAT 32-formatted USB stick to the USB port 4 (see Main illustration on p. 9).

Alternatively, you can connect the device for the data export directly to a PC by using a USB cable:

Prerequisites

• PC with Windows, version XP, SP2 or higher version.
• USB cable with a type A and type B plug each.

 Connect the device to the PC by using the USB cable on the USB port 8 (see Main illustration on p. 9).

4 (ON)

Zero = Normal

5 (ON)

International

6 (ON)

Character

7 (ON)

Set

8 (OFF)

= U.S.

DIP SW-3

Meaning

1 (ON)

Data Length = 8 bits

2 (ON)

Parity Setting = NO

3 (ON)

Parity Condition = Odd

4 (OFF)

Busy Control = XON/XOFF

5 (OFF)

Baud

6 (ON)

Rate

7 (ON)

Select

8 (ON)

= 9600 bps

• You do not need any special PC software for the data transmission: the transferred data

packets are recognized by the PC like a USB stick as a removable medium. For viewing the
data, you only need to open the registered data packet.

• The transmission of data to the USB stick or to the PC is started after completing the series

of measurement in the

DIP SW-2

Meaning