Eppendorf BioPhotometer - Manual (Page 16)

58
5 Operation
– To call up the "BCA" and "BCA micro" methods.
– To switch between the "BCA" and "BCA micro" methods.
– To enter figure 3.
– To call up the "OD 600 (measuring the bacteria density)" method.
– To enter figure 5.
– To call up the programming level.
– To exit the programming level.
– To call up the function level.
– To exit the function level.
– To enter a point.
– To change the sample number.
– To enter figure 0.
– To enter the dilution.
– To move the cursor to the next line.
(e.g. in the parameter list or function list).
– To calculate the molar concentration and the total amount of sample ("yield").
– To move the cursor to the previous line.
(e.g. in the parameter list or function list).
– To delete entries.
– To confirm entries.
– To measure a standard.
– To measure a blank.
– To measure a sample.
3
BCA
5
OD 600
Parameter
•
Function
0
Sample No.
Dilution
Conversion
Clear
Enter
Standard
Blank
Sample
05_Bedienung_e.fm Seite 58 Dienstag, 21. Februar 2006 10:09 Uhr