Eppendorf BioPhotometer - Manual (Page 12)

54
4 Installation
Delivery package – BioPhotometer
– Mains cable for BioPhotometer
– Operating manual, incl. short instructions
– Seal for cuvette shaft
4.1 BioPhotometer
Connect up Space required: Width: 40 cm
device Depth: 50 cm
Power connection: Safety socket
– Insert the mains plug of the device into the safety socket.
It is not necessary to set voltage of the device within the voltage range specified in
"Technical data" because the voltage is set automatically within this range.
Ambient conditions: see "Technical data".
– Remove the protective foil from the device display.
1 Mains switch 4 Printer connection, serial
2 Fuse holder (RS-232 C)
3 Mains connection
1
3 4
2
4 Installation
04_Installation_e.fm Seite 54 Montag, 20. Februar 2006 10:50 Uhr