Apple Logic (1.1) - Manual (Page 119)

Glossary 119
interface 1) A hardware component such as a MIDI or audio device that allows Logic
to “interface” (connect) with the outside world. You need an audio or MIDI interface to
get sound/MIDI into and out of your computer. Also see audio interface. 2) A term that
is used to describe Logic’s graphical elements that can be interacted with. An example
would be the Arrange window, where graphical interface elements such as Regions are
interacted with to create an arrangement, within the overall Arrange interface.
key The scale used in a piece of music, centered around a specific pitch. The specified
pitch is called the root of the key.
key command Function which can be executed by pressing a specific key (or key
combination) on your computer keyboard or MIDI controller.
Key Commands window The Key Commands window is used for the assignment of
key commands to computer keys or to MIDI messages. You can access the Key
Commands window by choosing Preferences > Key Commands.
latency You may notice a delay between playing your keyboard and hearing the
sound. This is a form of latency. A variety of factors contribute to latency including
audio interface, audio and MIDI drivers. One factor under you control, however, is the
I/O buffer size, which is set in the Audio > Audio Hardware & Drivers preferences.
level meter A meter that lets you monitor audio output levels from your computer.
You use the level meters in Logic when recording, arranging and editing audio files.
Link mode Link mode is activated by clicking the Link button. It determines the
relationships between windows. An editing window in Link mode shows the same
contents as the top window.
Link button Button featuring the chain link icon in the top left corner of most Logic
windows. It controls the linking between different windows.
local menu Menu in a window that only contains functions that are relevant to that
particular window.
Locators Lower two sets of numbers, displayed to the right of the Transport buttons in
the Transport window. The number on top is the left Locator; the number on bottom
the right Locator. The Left and Right Locators control the time-range which Logic’s
playback will cycle or skip during playback. The Locators also can be used to define the
editing area for certain functions.
Logic Setup Assistant A utility that guides you through the process of setting up your
Macintosh, audio and MIDI hardware to work with Logic. The Logic Setup Assistant can
be run at any time by choosing the Preferences > Start Logic Setup Assistant menu
item.