Apple PC Compatibility Card 12-inch card - Manual (Page 72)

2 Plug the connector on the long end of the loopback cable into your computer’s built-in
monitor port or video card.
This connector has an Apple (K) icon on one side and a monitor (™) icon on
the other.
Power Macintosh 7200
Power Macintosh 7500
Power Macintosh 7600
Power Macintosh 8500
Power Macintosh 9500
Attach the long connector on
the loopback cable to the built-in
monitor port (Power Macintosh
7500 and 7600) or video card
(Power Macintosh 7200, 7500
and 7600).
Attach the long connector on
the loopback cable to the
built-in monitor port on
the back of your computer
(or a video card, if one is installed).
Attach the long connector on the
loopback cable to the port on your
video card.
58 Chapter 3