Apple PC Compatibility Card 12-inch card - Manual (Page 162)

PROTOCOL.INI
[NETWORK.SETUP]
VERSION=0X3110
NETCARD=MS$ODIMAC,1,MS$ODIMAC,4
TRANSPORT=MS$NETBEUI,NETBEUI
LANA0=MS$ODIMAC,1,MS$NETBEUI
[LINK DRIVER MACODI]
DATA=FRAME ETHERNET_SNAP
DATA=FRAME ETHERNET_802.2
DATA=FRAME ETHERNET_II
DATA=FRAME ETHERNET_802.3
[NET.CFG]
PATH=C:\NWCLIENT\NET.CFG
[MS$ODIMAC]
PROTOCOLDOT2=F0
[NETBEUI]
BINDINGS=MACODI
LANABASE=0
SESSIONS=10
NCBS=12
Installing IPX/SPX in Windows for Workgroups
This section describes the settings necessary to install the IPX/SPX protocol
for use with an ODI driver in Windows for Workgroups.
Installing ODI drivers in Windows for Workgroups adds two commands to
the AUTOEXEC.BAT file:
m
NET START initializes the Windows network functions
m
ODIHLP.EXE calls Microsoft’s ODI to NDIS translation file
148 Appendix B