Apple PC Compatibility Card 12-inch card - Manual (Page 184)

3 Type the following and then press Return:
A:\SETNET.EXE
The Network Protocol Setup dialog box appears.
You should not need to select an option in the Network Driver area. The
SETNET utility automatically detects the network driver you installed.
4 Select one or more network protocols that you installed by clicking checkboxes in the
“Select Protocol and Frame Type” area.
You can select more than one protocol if you have installed more than one. If
you are only using one protocol, be sure to turn on its checkbox and leave the
other checkboxes turned off.
5 If you are using TCP/IP, ARP, RARP (TCP/IP), or IPX/SPX, select the appropriate frame
type for each selected protocol by clicking radio buttons in the Select Protocol and
Frame Type area.
6 Click OK.
7 Shut down or exit Windows.
170 Appendix B