Apple PC Compatibility Card 12-inch card - Manual (Page 54)

Installing the PC Compatibility Card
7 Insert the long connector on the bottom edge of the card into the slot behind the access
port cover you removed.
Line up the connector end of the card with the slot. The port on the card
should face the port access opening on the computer’s back panel near a lever.
Press the lever away from the card access port and press down firmly on the
card until the connector is fully inserted. Be sure that the card fits into the
card guide on the front of the computer. Don’t force the card. If you meet a lot
of resistance, pull the card out and try again.
To see if the card is connected, pull it gently. If it resists, it is connected.
Expansion slot Connector
Be sure that the
card engages the
card guide in the
computer’s interior.
Press the lever away
from the card access
port opening while
installing the card.
40 Chapter 2