Apple PC Compatibility Card 12-inch card - Manual (Page 157)

1 Start the NetWare Client Install program and follow the instructions on screen for
steps 1–3.
2 Select step 4.
A list of network interface controller (NIC) drivers appears.
3 Select Other Drivers and press Enter.
4 Insert the disk containing the NetWare client software and select Power Macintosh 6100
Ethernet Adapter.
5 Follow the instructions to select the proper frame type and to finish the installation.
Make sure your configuration files include the following:
CONFIG.SYS
FILES=40
STACKS=9,256
LASTDRIVE=Z
DEVICE=C:\Apple\CDROM.SYS /D:CDDRVR
AUTOEXEC.BAT
@CALL C:\NWCLIENT\STARTNET
PROMPT $P$G
PATH C:\WINDOWS;C:\DOS
PATH=C:\NWCLIENT\;%PATH%
STARTNET.BAT
@ECHO OFF
C:
CD \NWCLIENT
SET NWLANGUAGE=ENGLISH
LSL
MACODI.COM
IPXODI
VLM
CD \
NET.CFG
LINK DRIVER MACODI
FRAME ETHERNET_802.2
143 Installing Network Client Software