Poison Spyder LJ RICOCHET ROCKERS & ROCKER KNOCKERS User Manual

Installation instruc tio ns, Lj ricochet rockers & rocker knockers installation

INSTALLATION INSTRUC

TIO

LJ RICOCHET ROCKERS &

ROCKER KNOCKERS INSTALLATION

Thank you for purchasing Poison Spyder Rocker

Knockers (shown above) or Ricochet Rockers

for your Jeep LJ Unlimited. You now own the

ultimate in rocker panel protection for your Jeep.

If you purchased Rocker Knockers with the

Slider option, these have already been welded

to the Rocker Knockers and install in the same

manner, as do the Ricochet Rockers. Installation

is fairly simple with the right tools and good

mechanical abilities. If you are not confident in

your mechanical skills, please seek the help of a

professional to perform the installation. Please

read through these entire instructions before

proceeding with installation.

PARTS LIST

(1) Driver side Rocker Knocker
(1) Passenger side Rocker Knocker
(10) 3/8-16 X 1 SS flat head cap screw
(10) 3/8 flat washer
(10) 3/8-16 nylon insert lock nut

TOOLS NEEdEd

• 9/16” socket or end wrench
• 5/8” socket
• 6” socket extension
• Ratchet
• 7/32” hex key or hex socket

• Auto-punch or center punch and hammer
• Drill motor
• 3/16” drill bit
• 3/8” drill bit
• Rat-tail file or burr knife
• Torque wrench
• Touch-up paint or clear coat
• Floor jack and extension

BEfORE YOu BEgIN

• Paint or powdercoat both the inside and

outside of the Rocker Knockers. If painting

them yourself, take the time to do a thorough

job cleaning the Rockers and making sure

they are completely free of dirt, grease or

oils, solvents or cleaner residue. Sanding or

scuffing the surface will also help the primer

and paint to adhere. Use a quality etching

primer, then paint in your color of choice.

• Park the Jeep on a flat, level surface and set

the emergency brake.

• Be sure that the sides and undercarriage of

the vehicle, in the areas you will be working,

are clean and clear of debris and mud.

• Remove any fender lares or rocker panel

covers or moldings that will interfere with

the Rocker Knocker or Ricochet Rocker

installation.