beautypg.com

Poison Spyder CJ RICOCHET ROCKERS & ROCKER KNOCKERS User Manual

Installation instruc tio ns

background image

INSTALLATION INSTRUC

TIO

NS

©2009 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM

TJ-YJ-CJ RICOCHET ROCKERS &

ROCKER KNOCKERS INSTALLATION

Thank you for purchasing Poison Spyder

Ricochet Rockers (shown above) or Rocker

Knockers for your Jeep CJ, YJ or TJ. You now

own the ultimate in rocker panel protection for

your Jeep. If you purchased Rocker Knockers

with the Slider option, these have already been

welded to the Rocker Knockers and install in

the same manner, as do the Ricochet Rockers.

Installation is fairly simple with the right tools

and good mechanical abilities. If you are not

confident in your mechanical skills, please

seek the help of a professional to perform the

installation. Please read through these entire

instructions before proceeding with installation.

PARTS LIST

(1) Driver side Rocker Knocker
(1) Passenger side Rocker Knocker
(x) 3/8-16 X 1 SS flat head cap screw*
(x) 3/8 flat washer*
(x) 3/8-16 nylon insert lock nut*
*Quanitiy “x” varies by Jeep model:

(10) TJ

(12) CJ-5 & YJ

(14) CJ-7

TOOLS NEEDED

• 9/16” socket or end wrench
• 5/8” socket

• 6” socket extension
• Ratchet
• 7/32” hex key or hex socket
• Auto-punch or center punch and hammer
• Drill motor
• 3/8” drill bit
• Torque wrench
• Touch-up paint or clear coat
• Floor jack and extension

Before You Begin

• Paint or powdercoat both the inside and

outside of the Rocker Knockers. If painting

them yourself, take the time to do a thorough

job cleaning the Rockers and making sure

they are completely free of dirt, grease or

oils, solvents or cleaner residue. Sanding or

scuffing the surface will also help the primer

and paint to adhere. Use a quality etching

primer, then paint in your color of choice.

• Park the Jeep on a flat, level surface and set

the emergency brake.

• Be sure that the sides and undercarriage of

the vehicle, in the areas you will be working,

are clean and clear of debris and mud.

• Remove any plastic flares that are bolted to

the side of the body (some TJ’s and YJ’s).

This manual is related to the following products: