Hale MBP Booster - Manual (Page 93)

❑ Installation
92 Silencer Series Booster Pump, p/n: 029-0020-83-0
❑ Plate # 1026A ......MBP Silencer Series Booster Pump Installation and
Parts Identification
The Silencer Series Booster Pump offers the following suction and dis-
charge arrangements:
❑ Suction (Inlet) –
APS: ● Victaulic, Standard 5” (127mm) connection
●
ISO 228/1-G4-1-1/2” female pipe thread
● 4-1/2” NST
Suction/Discharge Manifold Kit (See Figure 2-13: “Typical
Manifold Assembly Option,” on page 26.)
MBP:
●
Victaulic, Standard 6” (152.4mm) connection
❑ Discharge, Standard –
● 4” (102mm) discharge port flange
Other flanges and manifolds are available. Contact Hale Prod-
ucts at 610-825-6300.