Hale MBP Booster - Manual (Page 81)

❑ Preventive Maintenance
80 Silencer Series Booster Pump, p/n: 029-0020-83-0
Figure 6-10: Oil Seal, Input Shaft
Installation Notes
(See Figure 6-10: “Oil Seal, Input Shaft.”)
To install, follow the preceding steps in the reverse order, paying attention to
the following:
❑ Review preceding sections “Before You Begin...,” on page 63 and
“Cleaning and Inspection Guidelines,” on page 65 to ensure a thor-
ough installation.
❑ Evenly press-in a new oil seal in the gearbox housing until flush
against the bearing. Also see Figure 6-11: “Typical Bearing and Seal
Insertion Tools” on page 81.
Lightly tap the seal around the edges to ensure an “even” seat.
Notes: It is recommended to manufacture insertion tools to assure a correct
installation of the input shaft bearings and oil seal. (See Figure 6-11: “Typical
Bearing and Seal Insertion Tools,” on page 81.) These drawings are provided to
assist in the manufacture of these tools.