Hale MBP Booster - Manual (Page 12)

11 Silencer Series Booster Pump, p/n: 029-0020-83-0
Safety Precautions
❑
1 Safety Precautions
IMPORTANT !
THE HALE SILENCER SERIES BOOSTER PUMPS ARE DESIGNED FOR OPTI-
MUM SAFETY OF ITS OPERATORS. FOR ADDED PROTECTION, PLEASE
FOLLOW THE SAFETY GUIDELINES LISTED IN THIS SECTION AND ADHERE
TO ALL WARNING, DANGER, CAUTION AND IMPORTANT NOTES FOUND
WITHIN THIS MANUAL.
ALL SUPPLIED DOCUMENTATION MUST BE CAREFULLY READ, UNDER-
STOOD AND ADHERED TO STRICTLY BY ALL INSTALLERS AND OPERATORS
BEFORE ATTEMPTING TO INSTALL OR OPERATE THE SILENCER SERIES
BOOSTER PUMP.
Hale is a registered trademark of Hale Products, Incorporated. All other brand and product
names are the trademarks of their respective holders.
1.1 GUIDELINES
NOTICE !
THE PROCEDURES IN THIS MANUAL ARE GENERAL OPERATING PROCE-
DURES. THEY DO NOT REPLACE THE PROCEDURES, POLICIES, GUIDE-
LINES ESTABLISHED BY THE AUTHORITY HAVING JURISDICTION, NOR DO
THEY REPLACE THE RECOMMENDATIONS AND PROCEDURES PROVIDED
IN THE APPARATUS MANUFACTURER'S MANUAL.
REFER TO PROCEDURES PROVIDED BY THE AUTHORITY HAVING JURIS-
DICTION ON SETTING WHEEL CHOCKS AS WELL AS LAYOUT AND CON-
NECTION OF HOSES, VALVES AND DRAIN COCKS.
❑ Use care when removing the Booster Pump assembly from its packaging
to prevent personal injury and/or damage to the system.
❑ To fully support the booster pump assembly, use all mounting bolt holes
provided on the gearbox and/or the booster pump.
❑ Installation should be performed by a trained and qualified installer, such
as your authorized Hale service representative. Be sure the installer has
sufficient knowledge, experience and the proper tools before attempting
any installation.