Hale MBP Booster - Manual (Page 82)

81 Silencer Series Booster Pump, p/n: 029-0020-83-0
Preventive Maintenance
❑
Figure 6-11: Typical Bearing and Seal Insertion Tools
If the bearing tool is not available, cover the flange retaining ring
groove with thin electrical tape to avoid cutting the oil seal as it is
inserted.
❑ Add fresh oil. (See Figure 6-2: “Gearbox Capacity / Recommended
Lubricants,” on page 62.) See Section 4: Preventive Maintenance,
heading “Gearbox Lubrication” on page 45.
6.8 DISMANTLE THE B SERIES GEARBOX
(See Figure 6-12: “B Gearbox Parts Identification,” on page 82.)
1. Remove the pump and gearbox assembly from the apparatus. See heading
“Pump and Gearbox Assembly” on page 67.
With the B series gearbox separated from other equipment, place and support
the assembly on a suitable stand or work bench.