Hale MBP Booster - Manual (Page 63)

❑ Preventive Maintenance
62 Silencer Series Booster Pump, p/n: 029-0020-83-0
Figure 6-2: Gearbox Capacity / Recommended Lubricants
6.1 OVERVIEW
This section describes the removal, inspection, and reinstallation (as
required for maintenance and repair) of the Silencer Series Booster Pump
and gearbox components. To completely dismantle the pump and gearbox,
follow the disassembly instructions in the order which they appear in this
text. At any point in the disassembly process, the unit can be reassembled
by following the instructions in the reverse.
Service should be performed by a trained and qualified service technician,
or your authorized Hale Products service representative. Be sure you have
sufficient knowledge, experience and the proper tools.
Gearbox
Orientation
Approximate
Capacity
Vertical
2 Quarts
(1.9 Liters)
Horizontal
(Right or
Left Hand)
1.5 Quarts
(1.4 Liters)
Inverted
1.75 Quarts
(1.7 Liters)
All lubricants must
meet service rating API
GL-5 requirements
Bolt Size
Lock Nut size
Material
Minimum Torque
Ft.-Lb. (N-m)
3/8-16 Zinc-Plated Steel 30 (41)
7-16-14 Zinc-Plated Steel 50 (68)
7/16-14 Silicon Bronze 29 (39)
- 06 Zinc-Plated Steel 32-60 (43-81)
- 07 Zinc-Plated Steel 32-60 (43-81)
Table 6-3: Torque Values Chart