Hale MBP Booster - Manual (Page 13)

❑ Safety Precautions
12 Silencer Series Booster Pump, p/n: 029-0020-83-0
WARNING !
THE BOOSTER PUMP AND GEARBOX ASSEMBLY IS HEAVY AND BULKY,
WEIGHING UP TO 145 LBS. (54 KGS.). ADDING ACCESSORIES INCREASES
THE WEIGHT. BE CERTAIN TO USE PROPER LIFTING SUPPORT DEVICES
CAPABLE OF HANDLING THE LOAD WHEN REMOVING OR INSTALLING THE
SILENCER SERIES BOOSTER PUMP AND GEARBOX ASSEMBLIES.
❑ The installer is responsible for observing all instructions and safety pre-
cautions in his or her daily routine as dictated by regional safety ordi-
nances or departmental procedures.
❑ DO NOT permanently remove or alter any protective feature, guard or
insulating devices, or attempt to operate the system when these guards
are removed.
Doing so voids the Silencer Booster Pump warranty.
❑ Any of the above could affect system capacity and/or safe operation of
the system and is a serious safety violation which could cause personal
injury or could affect safe operation of the pump.
WARNING!
NO MODIFICATIONS OR ADDITIONS MAY BE MADE TO THE SILENCER
SERIES BOOSTER PUMP ASSEMBLY WITHOUT PRIOR WRITTEN PERMIS-
SION FROM:
Hale Products, Incorporated
Fire Suppression Division
700 Spring Mill Avenue
Conshohocken, PA 19428 U.S.A.
Telephone.......... 610-825-6300
Fax..................... 610-825-6440
Web ................... www.haleproducts.com
❑ Rotating drive line parts can cause injury. Be extremely careful that NO
part of your body (head, feet, arms, legs, fingers, hair) is in an area of
rotating parts where you could be subject to injury.
❑ Make sure everyone is clear of the apparatus. Verify the parking brake is
set and the wheels are chocked to prevent any movement of the
apparatus.