Hale MBP Booster - Manual (Page 90)

89 Silencer Series Booster Pump, p/n: 029-0020-83-0
Installation
❑
7 Installation
7.1 OVERVIEW
This section provides guidelines and recommendations for installing the
silencer series pump assembly into your truck chassis.
7.2 FRAME MOUNTING
Also see Section “Installation and Parts Drawings,” located at the back of
this manual.
❑ Plate # 1027A ......APS Silencer Series Booster Pump Installation and
Parts Identification
❑ Plate # 1026A ......MBP Silencer Series Booster Pump Installation and
Parts Identification
IMPORTANT!
TO FULLY SUPPORT THE SILENCER SERIES BOOSTER PUMP ASSEMBLY,
USE ALL MOUNTING BOLT HOLES PROVIDED IN THE GEARBOX.
Mounting Holes
Four 7/16-14 tapped holes, 0.69” (17.5mm) deep mounting holes are pro-
vided. Mounting varies depending on assembly configuration, i.e.,
❑ Horizontal
❑ Vertical
❑ Inverted mount
❑ Standard engine rotation (clockwise)
❑ Opposite engine rotation (counterclockwise)