Belkin PM01110EA - Manual (Page 89)

87
g Wireless router
sections table of contents 1 2 3 4 5 6 8 9 10
Manually conFiguring nEtWorK sEttings
7
in order for your computer to properly communicate with your router, you will need to change your PC’s TCP/iP settings to DHCP�
Manually Configuring Network Adapters in Windows 2000, NT, XP, or Vista
1. Click “start”, “settings”, then “Control Panel”�
2. Double-click on the “Network and dial-up connections” icon
(Windows 2000) or the “Network” icon (Windows XP or Vista)�
3. right-click on the “local Area Connection” associated with your
network adapter and select “Properties” from the drop-down menu�
4. in the “local Area Connection Properties” window, click “internet
Protocol (TCP/iP)” and click the “Properties” button� The following
screen will appear:
5. if “Use the following iP address” (2) is selected, your router will
need to be set up for a static iP connection type� Write the address
information in the table below� You will need to enter this information
into the router�
6. if not already selected, select “Obtain an iP address automatically”
(1) and “Obtain DNs server address automatically” (3)� Click “OK”�
your network adapter(s) are now configured for use with the router.
(1)
(2)
(3)