Belkin PM01110EA - Manual (Page 70)

68
g Wireless router
sections table of contents 1 2 3 4 5 7 8 9 10 6
Using the Web-based advanced User interface
To restrict internet access to a single computer for example, enter the
iP address of the computer you wish to restrict access to in the iP fields�
Next, enter “80” in both the port fields� select “Both”� select “Block”� You
can also select “Always” to block access all of the time� select the day
to start on top, the time to start on top, the day to end on the bottom, and
the time to stop on the bottom� select “enable”� Click “Apply Changes”�
The computer at the iP address you specified will now be blocked from
internet access at the times you specified� Note: Be sure you have
selected the correct time zone under “Utilities> system settings> Time
Zone”�
Setting MAC Address Filtering
The MAC address filter is a powerful security feature that allows you
to specify which computers are allowed on the network� Any computer
attempting to access the network that is not specified in the filter list will
be denied access� When you enable this feature, you must enter the
MAC address of each client (computer) on your network to allow network
access to each�