Belkin PM01110EA - Manual (Page 49)

47
g Wireless router
sections table of contents 1 2 3 4 5 7 8 9 10 6
Using the Web-based advanced User interface
Configuring the Wireless Network Settings
Clicking on the header of the “Wireless” tab will take you to the “Wireless”
header page� Under the “Wireless” tab, there are links that allow you to
make changes to the wireless network settings�
Changing the Wireless Network Name (SSID)
To identify your wireless network, a name called the ssiD (service set
identifier) is used� The default ssiD of the router is “belkin54g”� You
can change this to anything you want to or you can leave it unchanged�
if there are other wireless networks operating in your area, you will want
to make sure that your ssiD is unique (does not match that of another
wireless network in the area)� To change the ssiD, type in the ssiD that
you want to use in the “ssiD” field and click “Apply Changes”� The change
is immediate� if you make a change to the ssiD, your wireless-equipped
computers may also need to be reconfigured to connect to your new
network name� refer to the documentation of your wireless network
adapter for information on making this change�