Belkin PM01110EA - Manual (Page 37)

35
g Wireless router
sections table of contents 1 2 3 4 6 7 8 9 10 5
altErnatE sEtup MEthoD
1. ip address
Provided by your isP� enter your iP address here�
2. subnet Mask
Provided by your isP� enter your subnet mask here�
3. isp gateway address
Provided by your isP� enter the isP gateway address here�
Setting your Internet Service Provider (ISP) Connection Type to Static IP
A static iP address connection type is less common than other connection types� if your isP uses static iP addressing, you will need your iP address,
subnet mask, and isP gateway address� This information is available from your isP or on the paperwork that your isP left with you� Type in your
information, then click “Apply Changes”� After you apply the changes, the “internet status” indicator will read “Connected” if your router is set
up properly�