Belkin PM01110EA - Manual (Page 35)

33
g Wireless router
sections table of contents 1 2 3 4 6 7 8 9 10 5
altErnatE sEtup MEthoD
Step 4 Configure your Router for Connection to your Internet Service Provider (ISP)
The “internet/WAN” tab is where you will set up your router to connect to
your internet service Provider (isP)� The router is capable of connecting
to virtually any isP’s system provided you have correctly configured the
router’s settings for your isP’s connection type� Your isP connection
settings are provided to you by your isP� To configure the router with the
settings that your isP gave you, click “Connection Type” (A) on the left
side of the screen� select the connection type you use� if your isP gave
you DNs settings, clicking “DNs” (B) allows you to enter DNs address
entries for isPs that require specific settings� Clicking “MAC address” (C)
will let you clone your computer’s MAC address or type in a specific WAN
MAC address, if required by your isP� When you have finished making
settings, the “internet status” indicator will read “Connected” if your
router is set up properly�
(B)
(A)
(C)
Setting your Connection Type
From the “Connection Type” page, you can select the type of connection
you use� select the type of connection you use by clicking the button next
to your connection type and then clicking “Next”�