Belkin F4D116 User Manual
Instruction sheet- f4d116
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTRUCTION SHEET- F4D116
ALUMINUM EQUIPMENT RACK 19" X 48"
INSTRUCTIONS
1. Lay side rails (1) on the floor.
2. Assemble base angle (2), and top
angle (3) as shown in Figure 1.
3. Turn rack over and repeat base and
top angles on other side.
4. Square legs. Tighten all bolts.
5. Mount to floor, using suitable
fasteners (see note below).
6. Install equipment using provided
screws.
NOTE:
-Due to variances in floors, shims may
be needed under base angles.
-To square legs, measure diagonally
between top and bottom bolts. The
distance between A and B should be the
same as C and D (see Figure 2).
FIGURE!
B E L K I N
TOOLS NEEDED:
9/16" wrench or socket
Measuring tape
#2 Phillips screwdriver
Parts List
ITEM QTY
DESCRIPTION
1
2
Rack Leg
2
2
Rack Base
3
2
Top Angle
4
12
Flat Washer 3/8"
5
12
Hex Cap Screw 3/8-16 x 1
6
30
Pan Head Phillips 12-24 x 0.625