Belkin PM01110EA - Manual (Page 42)

40
g Wireless router
sections table of contents 1 2 3 4 6 7 8 9 10 5
altErnatE sEtup MEthoD
Setting your Connection Type if you are a Telstra ® BigPond User
[Australia and New Zealand Only]� Use this connection type for BigPond Cable and OptusNet Cable connections only�
Clicking “Apply Changes” will reboot the router� Once the router has
rebooted, you will need to do the following:
1) Unplug the power cable from both the cable modem and the
Belkin router�
2) reconnect the power cable to the cable modem, and wait until all the
lights on the modem have stopped flashing�
3) reconnect the power cable to the Belkin router�
To confirm you are successfully connected to the internet, open an
internet browser, such as internet explorer ® , Firefox ® , or safari ® , and
ensure that you can browse web pages�