Belkin PM01110EA User Manual

Page 107

105

g Wireless router

sections

table of contents

troublEshooting

Problem:
Do Belkin products support WPA?

Solution:
note: To use WPA security, all your clients must be upgraded to drivers

and software that support it� At the time of this publication, a security

patch download is available, for free, from Microsoft� This patch works

only with the Windows XP operating system�

Download the patch here:

http://www�microsoft�com/downloads/details�aspx?FamilyiD=009d8425-

ce2b-47a4-abec-274845dc9e91&displaylang=en

You also need to download the latest driver for your Belkin Wireless

802�11g Desktop or Notebook Network Card from the Belkin support site�

Other operating systems are not supported at this time� Microsoft’s patch

only supports devices with WPA-enabled drivers such as Belkin 802�11g

products�

Download the latest driver at http://web�belkin�com/support for the

following products:
F5D7000, F5D7001, F5D7010, F5D7011, F5D7230-4, F5D7234-4,

F5D7231-4, F5D7130

Problem:
i am having difficulty setting up Wi-Fi Protected Access (WPA) security on

a Belkin Wireless router or Belkin Access Point for a home network�

Solution:

1. From the “security Mode” drop-down menu, select “WPA-PsK”�

2. For “encryption Technique”, select “TKiP” or “Aes”� This setting will

have to be identical on the clients that you set up�

3. enter your pre-shared key� This can be from eight to 63 characters

and can be letters, numbers, symbols, or spaces� This same key

must be used on all of the clients that you set up� For example, your

PsK might be something like: “smith family network key”�

4. Click “Apply Changes” to finish� You must now set all clients to match

these settings�