Belkin PM01110EA User Manual

Page 63

g Wireless router

sections

table of contents

Using the Web-based advanced User interface

The router is now acting as an access point� To access the router’s

Web-Based Advanced User interface again, type the iP address you

specified into your browser’s navigation bar� You can set the encryption

settings, MAC address filtering, ssiD, and channel normally�

Wireless Range Extension and Bridging
Wireless range extension and bridging works with the following

models only:
F5D7231-4 Wireless G Plus router
F5D7234-4 G Wireless router
F5D7130 Wireless G range extender/Access Point
F5D7132 Wireless G Universal range extender
Please make sure to download the latest firmware version

for the router or Access Point for optimal performance:

http://web.belkin.com/support.

What is a Wireless Bridge?
A wireless bridge is a “mode” in which your Wireless router can directly

connect to a secondary Wireless Access Point� Note that you can only

bridge your Belkin G Wireless router (model F5D7234-4, F5D7231-4)

to a Belkin Wireless G range extender/Access Point (model F5D7132,

F5D7130)� We do not support bridging with access points of other

manufacturers at this time� You can use the bridge mode to extend the

range of your wireless network, or add an extension of your network in

another area of your office or home without running cables�