Belkin PM01110EA - Manual (Page 43)

41
g Wireless router
sections table of contents 1 2 3 4 6 7 8 9 10 5
altErnatE sEtup MEthoD
Setting your Internet Service Provider (ISP) Connection Type to Layer 2 Tunneling Protocol (L2TP)
[israel Only]� some isPs require a connection using l2TP protocol, a type of connection most common in israel� This sets up a direct connection to the
isP’s system� Type in the information provided by your isP in the space provided� When you have finished, click “Apply Changes”� After you apply the
changes, the “internet status” indicator will read “Connected” if your router is set up properly�
1. l2tp account
Provided by your isP� enter your l2TP User iD here�
2. l2tp password
Type in your password and retype it into the “retype Password” box to
confirm it�
3. host name
Provided by your isP� enter your host name here�
4. service ip address
Provided by your isP� enter your l2TP gateway/service iP address here�