Belkin PM01110EA User Manual

Page 60

g Wireless router

sections

table of contents

Using the Web-based advanced User interface

Setting WPA/WPA2

4. Click “Apply Changes” to finish� You must now set all clients to match

these settings depending on the type of access you want them to

have�

Guest Access
The guest pre-shared key allows guest users an internet-only access to

restrict them from entering your network and having access to files on

your PCs� enter your pre-shared key for guest access� This can be from

eight to 63 characters and can be letters, numbers, or symbols� Click

“Apply Changes” to finish�

1. select “WPA/WPA2-Personal (PsK)” from the “security Mode” drop-

down box�

2. select “WPA-PsK” for just WPA authentication, or “WPA2-PsK” for

just WPA2 authentication, or you may select “WPA-PsK + WPA2-

PsK” for WPA and WPA2 as the authentication type�

3. enter your pre-shared key� This can be from eight to 63 characters

and can be letters, numbers, or symbols� This same key must

be used on all of the clients that you set up� This pre-shared key

will allow users full access to your network including shared files

and printers�