Belkin PM01110EA User Manual

Page 15

g Wireless router

sections

table of contents

connEcting anD conFiguring your routEr

Step 1: Hardware Connections

a. Unplug your modem’s power cord� Put the router next to the

modem� raise the router’s antenna�

b. locate the networking cable that connects your modem and

computer� Unplug that cable from your modem, and plug it into any

gray port on the back of the router�

c. Find your new networking cable (included in the box with your

router) and connect it to the yellow port on the back of the router�

Connect the other end to your modem, in the port that’s now free�

D. Plug in your modem’s power cord� Wait 60 seconds for the modem

to start up� Plug the router’s power supply into the black port on the

back� Plug the other end into the wall outlet�

Wait 20 seconds for the

router to start up� look at

the display on the front of

the router� Make sure at

least one of the “Wired”

and “Power” icons are lit

up in green� if they are not,

recheck your connections�

LAN

WAN