Belkin PM01110EA - Manual (Page 39)

37
g Wireless router
sections table of contents 1 2 3 4 6 7 8 9 10 5
altErnatE sEtup MEthoD
1. user name
This space is provided to type in your user name that was assigned by
your isP�
2. password
Type in your password and re-type it into the “retype Password” box to
confirm it�
3. service name (optional)
A service name is rarely required by an isP� if you are not sure if your isP
requires a service name, leave this blank�
4. My internet ip
1) Get Dynamically From isP: Getting WAN iP address from
isP automatically�
2) Use static iP address: Need to enter isP information below fields
(My iP Address)�
5. My ip address
Provided by your isP� enter the iP address here� (Only available when
user selects “Use static iP address” from iP Address Assignment above�)
6. Mtu
The MTU setting should never be changed unless your isP gives you
a specific MTU setting� Making changes to the MTU setting can cause
problems with your internet connection including disconnection from the
internet, slow internet access, and problems with internet applications
working properly�
7. Disconnect after X minutes…
This feature is used to automatically disconnect the router from your
isP when there is no activity for a specified period of time� For instance,
placing a check mark next to this option and entering “5” into the minute
field will cause the router to disconnect from the internet after five
minutes of no internet activity� This option should be used if you pay for
your internet service by the minute�