Brocade Communications Systems 415 - Manual (Page 89)

Brocade Adapters Administrator’s Guide 75
53-1001583-01
Define Name dialog box
A
Define Name dialog box
The Define Name dialog box enables you to assign a name to an existing world wide name.
Opening the dialog box
1. Right-click on an HBA or a port in the device tree.
2. Type a name that represents the adapter or port.
NOTE
The WWN and the Type are not editable.
3. Click OK to apply the change and close the window.
The new component is added to the Name list.
Fields and components
Using the dialog box
Refer to the following topics for specific procedures using this dialog box:
• “Name configuration”
• “Adding name entries”
• “Removing a name entry”
• “Exporting the properties for a WWN”
• “Importing the properties for a WWN”
Field Description
WWN/MAC The world wide name for the device.
Name Enter a meaningful name for the device.
Type The type of device; for example, Node or Port.
Description Enter a description of the device.