Brocade Communications Systems 415 - Manual (Page 136)

122 Brocade Adapters Administrator’s Guide
53-1001583-01
About the BCU
B
About the BCU
This appendix provides reference documentation for the Brocade Command Line Utility (BCU)
supporting the Brocade Fibre Channel components.
BCU runs in two modes:
• Direct mode, where you type the command at the command prompt. For example:
bcu port
--topology
• Shell mode, accessed using the bcu shell; for example,
bcu> port
--topology .
- To access the shell mode, type bcu shell.
- To exit out of shell mode, type exit.
All the commands in this appendix are shown in the direct mode. For example:
bcu port
--topology
To list all the commands and subcommands, type the following command:
bcu
--help
To check the CLI and Driver version number, type the following command:
bcu
--version
BCU commands
The following table lists the Brocade Command Line Utility (BCU) commands alphabetically that are
available for configuring the devices in a SAN environment that use a Brocade adapter.
Command Operands Synopsis
bcu --help Lists all available sub-commands.
bcu --help Lists all details about the specific subcommand.
Adapter commands
bcu adapter --list
--name
--query
--enable
--disable
Authentication commands
bcu auth --show
--policy
--reinit
--algo
--secret “secret string”
--stats