Brocade Communications Systems 415 - Manual (Page 32)

18 Brocade Adapters Administrator’s Guide
53-1001583-01
Host security authentication
3
2. Select Configure > Authentication from the main menu, or perform the appropriate following
step to open the security authentication dialog box:
• From the host level, right-click the host and select Authentication from the list.
The Fibre Channel Security Protocol Configuration (host level) dialog box displays, as
shown in
Figure 7 .
• From the adapter level, right-click the adapter and select Authentication from the list.
The Fibre Channel Security Protocol Configuration (adapter level) dialog box displays. This
dialog box is identical to the Fibre Channel Security Protocol Configuration (host level)
dialog box.
• From the adapter port level, right click a port and select FC-SP > Authentication from the
list.
The Fibre Channel Security Protocol Configuration dialog at the host level displays.
FIGURE 7 Fibre Channel Security Protocol Configuration - host-level dialog box