Brocade Communications Systems 415 - Manual (Page 49)

Brocade Adapters Administrator’s Guide 35
53-1001583-01
Advanced port configuration
3
Advanced port configuration
You can access the Advanced Port Configuration dialog box by selecting an HBA port from the
device tree.
For each port, you can configure the following parameters using the Advanced Port Configuration
dialog box, the Brocade Command Line utility (BCU), or both.
Table 7 lists the features and
configuration options.
Opening the Advanced Port Configuration dialog box
1. Select an HBA port from the device tree.
2. From the Host Connectivity Manager, select Configure > Port Configuration > Advanced.
The Advanced Port Configuration dialog box, shown in Figure 13 , displays.
FIGURE 13 Advanced Port Configuration dialog box
TABLE 7 Advanced port configuration options
Port configuration parameter Configurable using HCM Configurable using the BCU
Interrupt Control Coalesce Yes Yes
Interrupt Control Latency Yes Yes
Interrupt Control Delay Yes Yes