Brocade Communications Systems 415 - Manual (Page 120)

106 Brocade Adapters Administrator’s Guide
53-1001583-01
Restore dialog box
A
Restore dialog box
You can use the Restore Data dialog box to restore data that has been previously backed up. The
Host Connectivity Manager (HCM) stores the location and version details of the most recently-taken
backed up data and automatically points to the location of the data.
NOTE
Use HCM 2.1 or later to restore backed up data. HCM 2.0 and earlier versions do not support the
Restore Data feature.
The following data is restored:
• HBA application configuration data (HBAApplication.properties)
• HCM user authentication data (noitacitnehtua.properties)
• Alias Configuration data (HbaAliasdb.properties)
• Setup Discovery Data (SetupDiscovery.properties)
• Syslog Data (Syslog.properties)
• HCM Logging Data (logging.properties and log4j.xml)
• SupportSave
Opening the dialog box
1. Select a host, an HBA, or a port from the device tree.
2. Select Tool > Restore Data from the main menu.
The Restore Data dialog box displays.
Fields and components
Field Description
Restore from previous backup data
button Click to enable the Browse button, which enables you to locate the
last backed-up file.
Browse button Click to navigate to where the last backed-up file resides.
Restore default data button If you click this button, the Browse text field is grayed out and the
last restored data file is automatically retrieved.
Start Restore button Click to restore the backed up data that you selected.