Brocade Communications Systems 415 - Manual (Page 137)

Brocade Adapters Administrator’s Guide 123
53-1001583-01
BCU commands
B
--statsclr
BIOS commands
bcu bios --query
--enable [-s speed] [-o auto|flash|firstlun] [-p pos]
{-b pwwn,lun}*
--disable
Boot commands
bcu boot --blunZone -c -p -r -l
--update [adapter_id] [-a]
Debug commands
bcu debug --portlog
--portlogclear
--portlogctl
Diagnostic commands
Note: The sfpshow and beacon diagnostic tests are not available on the Brocade 804 mezzanine card.
bcu diag --sfpshow
--tempshow
--beacon {on | off} []
--pciloopback [-p ] [-c ]
--loopback [-t ] [-s ]
[-c ] [-p ]
--memtest
--queuetest [-q ]
Driver configuration commands
Note: Driver configuration commands are supported only on Windows operating systems.
bcu drvconf --key
--val
Possible key_name and value ranges are:
•
key = bfa_ioc_queue_depth, value range [>0] default = 2048
•
key = bfa_lun_queue_depth, value range [>0] default = 32
•
key = ioc_auto_recover, value range [0-1] default = 1
•
key = rport_del_timeout, value range [>0] default = 90
•
key = msix_disable, value range [0-1] default = 1
FC diagnostic commands
bcu fcdiag --fcping [-l lpwwn]
--fctraceroute [-l lpwwn]
--fcecho [-l lpwwn]
--linkbeacon {on|off}
--scsitest [-l lpwwn]
FCP initiator mode commands