Removing a name entry, Exporting the properties for a wwn – Brocade Communications Systems 415 User Manual
Page 54
40
Brocade Adapters Administrator’s Guide
53-1001583-01
Name configuration
3
Removing a name entry
The Remove functionality clears the name and description values of a selected detached WWN.
1. Select an HBA, an HBA port, or a Virtual Port from the device tree.
2. Select Configure > Names from the Host Connectivity Manager.
OR
Right-click a device from the device tree and select Configure > Names.
The Configure Names dialog box displays all the names available at the host.
3. Select one of the following from the Display list:
•
Current Host
•
All WWNs
•
Only Nodes
•
Only Ports
•
Only V_Ports
•
Only Remote Ports
A list of names for the devices you selected displays.
4. Select a device to highlight it and click the Remove button to remove the discovered device
from the list.
The Remove button clears the names of the discovered WWN and the entire row of the
detached (undiscovered) WWN.
5. Click OK to close the window.
Exporting the properties for a WWN
You can export the properties for a world wide name in .csv, *.properties, or .txt file format.
1. Select an HBA, an HBA port, or a Virtual Port from the device tree.
2. Select Configure > Names from the Host Connectivity Manager.
OR
Right-click a device from the device tree and select Configure > Names.
The Configure Names dialog box displays.
3. Select one of the following from the Display list:
•
Current Host
•
All WWNs
•
Only Nodes
•
Only Ports
•
Only L_Ports
•
Only V_Ports
•
Only Remote Ports