Using the property panel – Brocade Communications Systems 415 User Manual
Page 114
![background image](/manuals/52046/114/background.png)
100
Brocade Adapters Administrator’s Guide
53-1001583-01
Port Properties panel
A
Using the property panel
Refer to the following topics for specific procedures using this dialog box:
•
“Configuring the port speed using HCM”
•
“Specifying the maximum frame size using HCM”
•
“Specifying path time out using HCM”
•
“Configuring the HCM logging level using HCM”
•
“Enabling and disabling persistent binding using HCM”
•
“Enabling and disabling rate limiting on the adapter side using HCM”
Frame Data Field Size
The frame size, in byres, of the port. The default is 2112. Select auto
to set the frame data field size automatically.
# of Lports
The number of logical ports in the configuration.
Port Log
Indicates whether port logging is enabled or disabled.
Operating Parameters
Path Time Out
The value between 0 and 60 that specifies the time out session. The
default value is 30.
Logging Level
The port logging level. Values include Log Critical, Log Error, Log
Warning, Log Info, and Log Invalid.
Target Rate Limit
Indicates whether target rate limiting is on or off.
Default Rate Limit
Select the target rate limit from the list. Options include 1 Gbps (the
default), 2 Gbps, and 4 Gbps.
FC-SP Parameters
Authentication
Indicates whether FC-SP authentication is on or off.
Status
The status of Fibre Channel Security Protocol (FC-SP) authentication.
Algorithm
The configured authentication algorithm.
Group
The DH Group (DH Null, group 0, is the only option).
Error Status
The health status of the Fibre Channel Security Protocol (FC-SP)
parameters.
QoS Parameters
Configured QoS State
Indicates whether QoS is enabled or disabled.
Operating QoS State
Indicates whether QoS is online or offline.
Total BB Credit
The total number of receive buffers.
Priority Levels
QoS priority levels. Values include High, Medium, and Low.
Field
Description