Brocade Communications Systems 415 - Manual (Page 156)

142 Brocade Adapters Administrator’s Guide
53-1001583-01
fcdiag
B
--scsitest Tests the SCSI components.
port_id Specifies the ID of the port for which you want to run the scsitest command.
rpwwn Specifies the remote port world wide name.
-l lpwwn Specifies the logical port world wide name. This is an optional argument. The
base port is specified as 0; otherwise, the port is a virtual port.
Example
bcu fcdiag
--
fctraceroute 2/0 50:05:07:63:04:13:46:eb
Error: Reject from attached fabric
bcu fcdiag
--
fctraceroute 2/0 50:05:07:63:04:13:46:eb
FC Traceroute completed successfully. Path Info:
bcu fcdiag
--
fctraceroute 2/0 50:05:07:63:04:13:46:e1
FC Traceroute Failed. Reason : Destination Port not in Fabric
bcu fcdiag
--
fcecho 2/0 50:05:07:63:04:13:46:eb
FC ECHO completed successfully
See Also “diag”
Switch WWN Switch Domain ID Ingress Port # Egress Port #
10:00:08:00:88:03:31:8b 127 5 11
10:00:08:00:88:03:31:8b 127 11 5