Brother BES-962BC - Manual (Page 52)

Chapter 2 Preparation of Embroidery Machine
BES-962BC • BES-1262BC 50
If the tubular round arms cannot be set in a
horizontal position (inclined) because of
the weight of fabrics, make an adjustment
using roller spacers in the following steps.
(Four roller spacers are inserted before
shipment.)
1. Loosen bolts
w
of X roller base
q
and
remove roller spacers
e
.
2. Insert a proper number of roller spacers
e
between X roller base
q
and X-feed frame
N
r
. Tighten bolts
w
.
Note) When tightening bolts
w
, press X roller base
q against X-feed frame N r and leave no
backlash in between.
3. For the other roller spacers, follow the
above steps.
Note) Use the same number of roller spacers in ev-
ery position.
• If tubular round arms are not in a horizontal position:
Follow these steps for adjustment:
q
w
e
r