Brother BES-962BC - Manual (Page 50)

Chapter 2 Preparation of Embroidery Machine
BES-962BC • BES-1262BC 48
3-4 Attachment of Embroidery Hoop and Frame
Tubular square hoop
1. Insert the fixing pins of the tubular round arms R
q
and L
w
into the notches of the X-axis
feed frame
e
. Slide the arm to the right and left and lower the fixing lever
r
to fix them.
2. Set the right and left fixtures of the tubular square hoop
t
while sliding them under the flat
spring
y
upward. Then fit the frame projecting part
u
into the hole of the tubular square
hoop
t
securely.
w
q
r
e
q
y
u
t