Insert or delete code – Brother BES-962BC User Manual

Page 114

Chapter 5 Editing Embroidery Data

BES-962BC • BES-1262BC

112

Insert (delete) change
color code
Insert (delete) pause code
Insert (delete) trim code
Consecutive step forward specified
Step forward specified
Stop
Step backward specified
Consecutive step backward specified

Insert or Delete Code

Codes of trim, pause and color change can be inserted or deleted by moving the

needle to the desired position.

Select [Insert or delete code] from the Edit menu.

Needle movement tool bar is displayed.

Select the movement method of needle position.

Click either of the following buttons:

1 step

Moves the needle position by 1 step each.

10 step

Moves the needle position by 10 step each.

100 step

Moves the needle position by 100 step each.

Next (previous) color change point

Moves the needle position to the next (previous) color change point.

Next (previous) feed point

Moves the needle position to the next (previous) feed point.

Next (previous) trim code

Moves the needle position to the next (previous) trim code.

Next (previous) pause code

Moves the needle position to the next (previous) pause code.

Move the needle position to the desired position.

Click either of the following buttons:

Consecutive step backward specified

The needle position returns consecutively until the "Stop" button is pressed.

Step backward specified

The needle position returns for the specified length.

Stop

The needle position stops movement.

Step forward specified

The needle position moves forward for the specified length.

Consecutive step forward specified

The needle position moves forward consecutively until the "Stop" button is pressed.

Insert or delete the code.

Click either of the following buttons:

Insert (delete) trim code

Insert (or delete) the trim code at the current needle position.

Insert (delete) pause code

Insert (or delete) the pause code at the current needle position.

Insert (delete) change color code

Insert (or delete) the change color code at the current needle position.

5. To end code insertion or deletion, click

1 step
10 step
100 step
Next (previous) color change point
Next (previous) feed point
Next (previous) trim code
Next (previous) pause code