Brother BES-962BC - Manual (Page 140)

BES-962BC • BES-1262BC 138
Chapter 6 Embroidering
Changing display colors
The color of needle bar changes to the actual color.
Changing the thread spool also changes the display color. A confirmation screen
to save appears before exiting from embroidering or retrieving other data.
A display color can be selected from among the following four items.
Basic color which can be selected screen Refer to steps 1 and 2.
on the "Color selection"
Color sample supplied by a manufacturer Refer to steps 1 and 3.
Color sample created by a user Refer to steps 1 and 3.
Adjustment of an intermediate color from the Refer to steps 1 to 7.
color sample supplied by a manufacturer or
naming and registration of a newly created color
The following screen is displayed when colors to be displayed are set to 256 in
[Display properties] and the color sample supplied by a manufacturer cannot be
selected or an intermediate color cannot be created.
1. Double-click the thread spool or needle bar number.