Brother BES-962BC - Manual (Page 154)

BES-962BC • BES-1262BC 152
Chapter 6 Embroidering
Hoop Feed Position
Set the basic position of the hoop (hoop feed position) for cancellation of
embroidering.
The hoop feed position can be set only in the embroidering area surrounded by a
red frame.
1. Select [Hoop Feed Position] from Settings menu.
2. Click the point to feed the hoop.
3. The gray cross appears and shows the hoop feed position.
Embroidery Area
Sets the embroidery area.
1. Select [Embroidery Area] from Settings menu.
2. Drag the embroidery area using the mouse for designation.
The embroidery area is displayed in light blue.
Hood feed position