Brother BES-962BC - Manual (Page 45)

Chapter 2 Preparation of Embroidery Machine
BES-962BC • BES-1262BC 43
3. Preparation for Embroidering
Turn off the power switch before starting preparation.
Failure to do so may start the machine unintentionally through an accidental activation of the START switch,
resulting in bodily injuries.
CAUTION
3-1 Upper Threading
BES-962BC
q
No.2,5,8
No.1,4,7
Needle Bar No.3,6,9
w Thread guide
tension disc
e Thread breakage
pulley
r Upper thread
guide (upper)
t Upper thread
guide (middle)
y Thread guide
u Thread guide A
i Lower thread
guide
Rotary
tension
disc
Spring
Inner thread
guide
u Thread guide A
i Lower thread
guide
1. Pass an upper thread from the cotton stand through the hole of the thread guide right above
each cotton stand bar. Pass the thread from the back to the front hole.
2. Pass the thread through the upper hole of the pretension. Push up the thread guide tension
disc
w
with your finger, and pass it from the left to the lower hole.
o Needle bar
thread guide