Toshiba Satellite Pro 4320 - Manual (Page 97)

User's Manual Setup and Password Security 7-9
Version
1
Last Saved on 27/01/00 18:20
Satellite Pro 4200/4300 User's Manual – 4200_UK.doc – ENGLISH – Printed on 27/01/00 as IM_420UK
Power On Display
Lets you set the display to be used when the computer is booted.
Auto-Selected Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD. (Default)
Simultaneous Selects both the internal LCD and external
monitor for simultaneous display.
You cannot select TV display in TSETUP. To display on a TV screen use
hot keys Fn + F5. Refer to Chapter 5,
The Keyboard .
The LCD Display Stretch feature cannot be set in the Display window of
Hardware Setup. To set this function, follow the steps below.
1. Click Start, point to Settings and click Control Panel.
2. Double-click the Display icon to open the Display Properties
window. If you are using Windows 95, skip to step 4. If you are using
Windows 98, continue with step 3.
3. Click the Settings tab and click the Advanced button.
4. Click the Flat Panel tab and click the Display Stretch check box.
LCD Display Stretch
This feature is used to enable or disable the text mode stretch.
The options are Enabled and Disabled (Default). Enabling this feature
increases the display area of the screen.
TV
This option allows you to select the type of TV.
TV Type NTSC (National Television System Committee)
PAL (Phase Alternation Line)
TV Output Signal Composite
Others
Whether or not you need to configure the computer with these options
depends primarily on the kind of software or peripherals you use.