Choosing test options -18, Choosing test options – Toshiba Satellite Pro 4320 User Manual
Page 166

9-18 Troubleshooting
User's Manual
Satellite Pro 4200/4300 User's Manual – 4200_UK.doc – ENGLISH – Printed on 27/01/00 as IM_420UK
Choosing test options
Before the test begins, you are prompted to select whether to test the
following components. To select the test, type Y at the prompt, otherwise
type N.
Component
Prompt
Diskette drive
Test the FDD (Y/N)?
This test writes patterns to the diskette. Use a
formatted, write-enabled diskette. Data on the
diskette will be destroyed.
Hard disk drive
Test the HDD (Y/N)?
This test writes a small amount of data to the
hard disk.
Printer
Test the Printer (Y/N)?
Before executing this test, make sure the printer
is connected and turned on.
If you select Y, the following prompt will appear:
Compatible with IBM printer (Y/N)?
Select Y for IBM compatible and N for non-
compatible. If you are not sure, select N.
Selecting Y for a non-compatible printer may
result in garble and processing of excess pages.